-40%
Sun Microsystems 611 External Enclosure Case 50-pin SCSI-2 68-pin Wide SCSI-3
$ 21.09
- Description
- Size Guide
Description
External SCSI Enclosure for a SCSI-1 or SCSI-2 DriveSun Microsystems Model 611 enclosure with an open front bezel
PN 599-2107-01
Houses a 5-1/4" or 3-1/2" drive
Open Face for a 5-1/4" optical drive, tape drive, etc
Two external 68-pin HD68 Wide signle ended SCSI connectors
One internal 0.1" 50-pin Berg-pin style SCSI connector
Internal SCSI ID switch cable (custom form factory, not the typical berg pin field)
IEC AC power input connector
SCSI ID switch (0-7)
Beige color
Includes the drive mounting sled
Note that the external interface is a 68-pin singled ended wide SCSI interface while the internal interface is a 50-pin IDC ribbon Cable SCSI-1 and SCSI-2 style internal connector.
The enclosure is intended for a 5-1/4" SCSI-1 or SCSI-2 tape or optical drive, but the sled also contains mounting points for a 3-1/2" hard drive.
The SCSI ID switch connectors to a non-standard drive-side connector. Rather than a cable with a 2x3 pin block, it is a 1x8 block keyed with one receptacle plugged. See the 9th photo for a detail of this connector. If you are using this with a drive that has a more common 2x3 SCSI ID pin field, you will need to make an adapter. The ID switch supports ID's 0-7.
The power cable contains a standard 4-pin molex style drive connector, but non-standard colors are used for the wires. This can been seen in the 7th, 8th and 9th photos. The pin assignment is standard with the center two ground, one side +5V and the other side +12V. I tested it with a meter to confirm the function of each pin and also connected a drive verify operation.
Shipped via USPS Priority Mail or potentially more economical Parcel Select ground service. I use the eBay shipping calculator to quote your shipping based on weight and your shipping address. Your order will ship at the 7 lb rate from zip code 60102.